The kit bolts two low-pressure beach wheels to the hull with dedicated brackets, spreading the weight so the boat does not dig in on sand or dunes. It includes the brackets, spacers and stainless hardware, but you drill the mounting holes yourself. It is made only for Blue Sky Boatworks boats.
Specs at a glance
- Fits: Blue Sky Boatworks 360 Angler and 360 Pro
- Wheels: 2 x 8 in diameter beach wheels
- Included: 2 brackets, 2 spacers, stainless 1/4-20 bolts, locknuts and washers, directions
- Tools needed: drill, 1/4 in bit, 7/16 in socket and wrench
Good to know
- Have a drill, 1/4 in bit and 7/16 in socket and wrench ready; they are not in the kit.
- Install each wheel with the inflation tube facing out, or you can damage the detent pin.
KayakDIY take: Drilling your own hull is a DIY job I’m always happy to see people take on carefully. For more upgrades, see my fishing kayak accessories guide.
The Buy button takes you to the retailer that ships the order. KayakDIY may earn a commission at no extra cost to you. Affiliate disclosure.
